Gear System Electric Sliding Gate Opener
The motor is for sliding gates as the picture shows, please confirm the weight and length of your sliding gates, this DKC500AC/DKC800AC model of the gear system electric sliding gate opener is for the gates up to 600kg/800kg.
Gear System Electric Sliding Gate Opener Instruction
The motor is for sliding gates as the picture shows, please confirm the weight and length of your sliding gates, this DKC500AC/DKC800AC model of the gear system electric sliding gate opener is for the gates up to 600kg/800kg.
We also selling the gate accessories, such as gate track and track wheels, gate end catch, gate guide rollers and gate stop, if you can't find them in out GATEXPERT store, please contact our service directly.
Dip switch
Number | Function | Description |
1 | Soft Start/Close Function | OFF–enabled ON–disabled Default position is OFF. |
2 | Limit Switch Setting | OFF–Normal Open ON–Normal Close Default position is ON, this should align with limit switch and is not recommended to be modified by the users. |
3
4
| Automatic Close Time Setting | Automatic close time setting: the gate is operated to open by remote control operation and will close automatically after a few seconds delay. 3 OFF 4 ON: automatic close delay time is 12s. 3 ON 4 OFF: automatic close delay time is 24s. 3 ON 4 ON: automatic close delay time is 36s. 3 OFF 4 OFF: no automatic close function. Default setting: 3 OFF 4 OFF Disable the automatic close function. |
5 | Auto-reverse Function | OFF-enable ON-disable Default position is OFF, this should align with the opener status and is not recommended to be modified by the users. |
6 | Remote Control Mode Switch | OFF-single channel mode ON-four channel mode |
Please ensure that the gate opener power cable is not plugged in at any stage before you finished the installation.
Küsi pakkumist
